Remote ON/OFF command
Control Connected Loads Locally or Remotely
Monitor and operate selected electrical loads through a connected switching solution with local control, remote commands, scheduling, and shared access—according to the selected model and configuration.
LocalLoad Control
RemoteON/OFF Operation
ConnectedLoad Management
iSwitch — Remote ON/OFF Controller
MayilVeera iSwitch is a connected ON/OFF controller intended for authorised remote and local operation of compatible electrical loads. It can be used for lighting, pumps, motors through suitable contactors, appliances, and selected facility or agricultural equipment.
Logical Architecture
A website-level view of how the product connects sources, processing layers, diagnostics, and destination systems.
Mobile Application / Web Application
01
Authorised Remote Command
02
Internet / Cloud — TBC
03
Wi-Fi Network
04
iSwitch Controller
Command LogicScheduleDiagnostics
Local Switch Input
05
Isolated Switching Output
Direct Rated Load
External Contactor/Relay
LightsPumpMotorApplianceFacility Load
Key Capabilities
Local switch input
Scheduling and countdown functions
Shared or role-based user access, if implemented
Status indication
Wi-Fi connectivity
Local operation when Internet access is unavailable, subject to the installed design
Command and connection diagnostics
External contactor control for suitable higher-power loads
Configurable restoration behaviour following power interruption
How It Works
The document flow is presented as an implementation-style process so visitors can understand the operating path quickly.
- 01
iSwitch connects to the configured Wi-Fi network.
- 02
An authorised user sends a command or creates a schedule.
- 03
The controller validates the command and changes the configured output state.
- 04
A local switch can provide on-site control according to the wiring configuration.
- 05
For motors or loads exceeding the internal output rating, iSwitch controls a suitably selected external contactor rather than the load directly.
- 06
The user interface displays command or output state as supported by the installed model.
Applications
Where It Fits
Agricultural pump control through a suitable contactor
Water-tank filling control when combined with appropriate sensors and logic
Lighting control
Garden and outdoor-light scheduling
Small office or shop load control
Remote operation of selected appliances
Facility auxiliary-equipment control
Controlled restart of compatible non-critical equipment
Seasonal or timer-based electrical loads
Benefits
Practical Benefits
Allows authorised operation without travelling to the equipment
Combines local control with remote convenience
Supports scheduled operation
Helps centralise control of selected distributed loads
Can retain the existing power switching arrangement by controlling an external contactor
Integration and Installation
Installation must be completed by a competent electrician. The installer must verify supply voltage, load type, inrush current, output rating, cable size, protective devices, earthing, enclosure, contactor requirement, and local switching arrangement.
Reliability, Safety and Limitations
iSwitch is not an emergency-stop device.
It is not a safety controller.
It does not replace overload, short-circuit, earth-leakage, dry-run, phase-failure, or motor protection.
A relay-command indication does not by itself prove that a motor or pump is running.
Independent operational confirmation requires suitable feedback, such as contactor auxiliary status, current sensing, pressure, or flow.
A local switch connected only to the controller input is not an independent hardwired bypass.
Remote control must not be used where an unexpected start could endanger people or equipment.
Need Help Selecting the Right Product?
Equipment and controller make or model
Required interfaces, protocols, channels, or tag count
Operating environment and target platform
Update rate, cycle time, delivery schedule, and custom engineering needs
Do not publish price, availability, certification, warranty, protocol, electrical rating, capacity, performance, or compatibility statements until they are linked to the exact shipping SKU or software version.
Frequently Asked Questions
Can iSwitch directly control a motor or pump?
Only when the exact electrical rating and load category allow it. Larger motors and pumps normally require a correctly selected contactor and protection system.
Does the displayed ON state confirm that the motor is running?
Not necessarily. It may confirm only that an output command was issued. Physical running feedback requires a suitable monitoring input.
Will the local switch work when the Internet is unavailable?
This depends on the model, wiring, firmware, and local-control design and must be confirmed in the product datasheet.
Choose the Right iSwitch Installation
Share the supply voltage, load type, power or current, motor details, contactor arrangement, number of channels, network availability, and required local/remote control behaviour.
View Products